Natural Stone

Serving the entire Valley

Process for deep cleaning using an alkaline cleanser   For cleaning of grease, oil, dirt, dry soil and soap scum (Alkaline cleaning): Vacuum all loose dirt and debris. Strip off all topical finishes such as waxes and coatings. Apply product using a low-pressure chemical-resistant sprayer. Agitate well using a weighted floor machine at 135 lbs., 175 rpm, fitted with a scrub brush attachment. Rinse well with clean water using a hard surface extraction wand and portable extraction machine.
Mechanical Refinishing of Honed Travertine   For scratch, etch, wear pattern removal and to restore the surface to an even finish. Depending on the severity of the damage to the stone and/or the desired surface appearance, we will use one or more of the following honing powders 80/280/400/600/800. For refinishing to a honed finish: Vacuum all dust, dirt and debris. Strip off all topical finishes such as waxes and coatings. Refinish using a weighted floor machine fitted with a natural hair pad. Refinish area with one or more of the above mentioned powders until the desired level of hone has been achieved.   Sealing & Protecting   Natural stone surfaces must be sealed to prevent or minimize staining. Leaving natural stone untreated may greatly hinder the complete removal of stains in the future.   Why should I seal my grout and natural stone?   A protected stone will be easier to clean, resist staining, and provide a safer and healthier environment. Considering the investment, why wouldn't you provide the surface with the maximum protection possible?   What is a sealer?   A sealer is like a coat of armor for your stone. The sealer we use will decrease the opportunity that anything can stain or harm your surface. We believe that you should always use an impregnation sealer allowing you to retain the natural beauty of the surface.